[CM] Frame alignment measurements

[Terry Gorsuch]

Thanks for the info. Where is a good place to get a set?

Terry Gorsuch
1977 Bronco Sport
351W EFI
TBird EEC
McCormick Harness
2.5" lift
3" body lift
35" BFG Tires
1965 2+2 Mustand
Resto inprogress 
Edmond Oklahoma





-----Original Message-----
From: classic-mustangs-bounces at lists.twistedpair.ca
[mailto:classic-mustangs-bounces at lists.twistedpair.ca] On Behalf Of
David
Sent: Wednesday, October 13, 2004 6:14 PM
To: A list for owners of Classic Mustangs
Subject: Re: [CM] Frame alignment measurements

The info is in the Chassis section of the Ford Shop Manual set.  If
you're doing a resto, I'd get a set for about $50 or so.  I don't have
that year handy - sorry.

*********** REPLY SEPARATOR  ***********

On 10/13/2004 at 2:38 PM Terry Gorsuch wrote:

>I am in the process of a complete restoration on my 1965 2+2. The car
>was hit on left front corner sometime in its life and I am trying to
>find out frame alignment information. 
>
>Any Ideas?
>
>Terry Gorsuch
>1977 Bronco Sport
>351W EFI
>TBird EEC
>McCormick Harness
>2.5" lift
>3" body lift
>35" BFG Tires
>1965 2+2 Mustand
>Resto inprogress 
>Edmond Oklahoma
>
>
>
>
>
>
>_______________________________________________
>Classic-mustangs mailing list
>Classic-mustangs at lists.twistedpair.ca
>http://lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs




_______________________________________________
Classic-mustangs mailing list
Classic-mustangs at lists.twistedpair.ca
http://lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs